The OLIGHT Baldr S combines a white LED light with a low-power green beam in a compact rail-mounted design.
This olight baldr s 800 lumens review looks at its output options, rechargeable battery, mounting compatibility, and practical tradeoffs for buyers considering this combination.
OLIGHT Baldr S Review Summary
The quick verdict

4,000+ ratings
Read Amazon ReviewsOLIGHT Baldr S
A compact rail-mounted light for buyers who want white illumination, an integrated green beam, rechargeable power, and ambidextrous controls.
- White LED output reaches up to 800 lumens, with a separate 100-lumen low mode.
- Integrated green beam output is below 5 mW and classified as Class 3R.
- Designed to fit most GL-style or Picatinny rails; the GL fitting is installed and a Picatinny adapter is included.
- Built-in 3.7 V, 380 mAh lithium polymer battery charges in about 80 minutes, with a stated maximum runtime of 140 minutes at 100 lumens.
Pros
- Combines white illumination and a green beam in a single compact unit.
- The 100-lumen low mode provides an option below the maximum white-light output.
Consider before buying
- The 140-minute maximum runtime applies to the 100-lumen setting; runtime at the higher output is not specified here.
- A built-in battery means charging is part of the routine rather than swapping a battery when power runs low.
Read the full review summary
The Baldr S pairs up to 800 lumens of white light with a green beam rated below 5 mW and classified as Class 3R.
A 100-lumen low mode adds a less intense setting, while dual ambidextrous switches provide momentary-on and constant-on operation. Its built-in battery charges magnetically, keeping the charging process separate from battery replacement.
This design is aimed at buyers who specifically want a compact rail-mounted light that combines white illumination and a green beam.
The included Picatinny adapter and installed GL-style fitting offer a starting point for two common rail formats, but checking the exact rail and fit on the intended setup remains important.
Buyers who prioritize the brightest available output or longer operation at the low setting should weigh those needs against the Baldr S’s stated output and runtime figures.
The buying factors
OLIGHT Baldr S Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
White-light output range
Offers up to 800 lumens plus a 100-lumen low mode, giving buyers two stated output levels for different situations.
Dual-function design
Combines a white LED light and a green beam in one compact rail-mounted unit.
Rail compatibility
Includes a Picatinny adapter and comes with the GL fitting installed; compatibility still depends on the specific setup.
Control access
Dual ambidextrous switches support momentary-on and constant-on operation by either hand.
Recharge convenience
The built-in 3.7 V, 380 mAh lithium polymer battery charges through a magnetic connection, with a stated full-charge time of 80 minutes.
Low-mode runtime
The stated maximum runtime is 140 minutes at 100 lumens, a useful reference for buyers comparing operating time at that setting.
Key Features and Specifications of OLIGHT Baldr S
- White LED output reaches up to 800 lumens, with a separate 100-lumen low mode.
- Integrated green beam output is below 5 mW and classified as Class 3R.
- Designed to fit most GL-style or Picatinny rails; the GL fitting is installed and a Picatinny adapter is included.
- Built-in 3.7 V, 380 mAh lithium polymer battery charges in about 80 minutes, with a stated maximum runtime of 140 minutes at 100 lumens.
- Dual ambidextrous switches offer momentary-on and constant-on activation.
Pros and Cons of OLIGHT Baldr S
Pros
- Combines white illumination and a green beam in a single compact unit.
- The 100-lumen low mode provides an option below the maximum white-light output.
- Includes a Picatinny adapter alongside the installed GL fitting.
- Ambidextrous controls support operation from either hand.
- Magnetic charging avoids removing the built-in battery for routine recharging.
Consider before buying
- The 140-minute maximum runtime applies to the 100-lumen setting; runtime at the higher output is not specified here.
- A built-in battery means charging is part of the routine rather than swapping a battery when power runs low.
- Rail fit should be checked against the intended equipment, even though the design is described as fitting most GL-style or Picatinny rails.
Who Should Buy OLIGHT Baldr S?
Good fit
Consider the Baldr S if you want one compact rail-mounted unit that pairs white light with an integrated green beam.
Its two stated white-light levels and ambidextrous momentary-on or constant-on controls make the feature set straightforward to assess against your intended use.
It may suit buyers who prefer a built-in rechargeable battery and magnetic charging over a replaceable-cell setup.
Before choosing it, confirm that your rail is compatible with the supplied fittings and decide whether the stated low-mode runtime meets your expectations for charging frequency.
Who should skip it
Look elsewhere if your priority is a rail light with a higher stated maximum output, or if you need a runtime figure for the brighter setting before deciding. The available specifications do not provide that higher-output runtime.
This is a poor fit if you want a handheld or pocket light rather than a rail-mounted unit, or if your intended setup does not match the GL-style or Picatinny fit described for the product.
OLIGHT Baldr S: output, controls, and fit
Two light functions in one compact unit
The combination of white LED light and a green beam is the Baldr S’s defining design choice. The white light reaches up to 800 lumens, while the green beam is specified below 5 mW and as Class 3R.
Buyers should consider whether they actually want both functions on the same rail-mounted device; if they need only white illumination, the added beam may not be a deciding advantage.
A useful low setting, with a runtime qualifier
The 100-lumen mode gives the light a lower output option than its maximum.
The stated maximum runtime of 140 minutes is specifically tied to this low setting, so it should not be treated as an estimate for running the light at 800 lumens.
If higher-output operating time is central to your choice, verify that figure before buying.
Check the rail and control reach
The unit is described as fitting most GL-style or Picatinny rails, with the GL fitting installed and a Picatinny adapter included. That helps explain the intended compatibility, but “most” does not guarantee a fit on every configuration.
Check the rail on the specific equipment and whether the dual switches are reachable in the way you expect.
Charging is simple but part of ownership
A built-in 3.7 V, 380 mAh lithium polymer battery and magnetic charging connection avoid routine battery removal. A full charge is specified at about 80 minutes.
Buyers should factor that charging interval into their routine and consider whether the stated low-mode runtime, rather than an unspecified brighter-mode duration, is enough for their use.
Alternatives to OLIGHT Baldr S
Tactical Flashlights alternative

1,000+ ratings
Read Amazon ReviewsOLIGHT PL-3R Valkyrie
Choose the PL-3R Valkyrie if a higher stated white-light output and additional operating modes matter more than having the Baldr S’s integrated green beam and low mode.
The Baldr S better matches a buyer who specifically wants that combined beam design.
- The PL-3R Valkyrie is a rechargeable rail-mounted weaponlight with up to 1,500 lumens and 10,200 candela.
- It supports momentary-on, constant-on, strobe, and lockout modes, with an adjustable mount and interchangeable inserts for GL-style and 1913 Picatinny rails.
- The Baldr S combines up to 800 lumens of white light with a green beam and includes a 100-lumen low mode.
Tactical Flashlights alternative

18,000+ ratings
Read Amazon ReviewsOLIGHT PL-Mini 2
Consider the PL-Mini 2 if you want a lower stated maximum output and an adjustable rail position, and do not need the Baldr S’s green beam.
The Baldr S is the more relevant fit when the integrated beam and 100-lumen setting are priorities.
- The PL-Mini 2 is a rechargeable rail-mounted light rated at 600 lumens with a stated 100-meter throw.
- Its adjustable rail adapter is described as compatible with Picatinny and GL-sized rails, and its magnetic USB cable connects directly to the light.
- The Baldr S offers up to 800 lumens, a green beam, a 100-lumen low mode, and an installed GL fitting with a Picatinny adapter included.
Is OLIGHT Baldr S Worth It?
The OLIGHT Baldr S is worth considering if you want a compact rail-mounted light that combines white illumination with a green beam, plus ambidextrous momentary-on and constant-on controls.
Its 100-lumen mode, built-in rechargeable battery, and included rail adapter broaden its appeal for buyers whose setup matches the described fit.
Before choosing it, account for the 140-minute maximum runtime being specified only at 100 lumens, and check the rail fit and control reach on your equipment.
If you need a higher stated output or a documented runtime at the brighter setting, compare those requirements carefully before committing.
Your review at a glance

4,000+ ratings
Read Amazon ReviewsOLIGHT Baldr S
A compact rail-mounted light for buyers who want white illumination, an integrated green beam, rechargeable power, and ambidextrous controls.
- White LED output reaches up to 800 lumens, with a separate 100-lumen low mode.
- Integrated green beam output is below 5 mW and classified as Class 3R.
- Designed to fit most GL-style or Picatinny rails; the GL fitting is installed and a Picatinny adapter is included.
- Built-in 3.7 V, 380 mAh lithium polymer battery charges in about 80 minutes, with a stated maximum runtime of 140 minutes at 100 lumens.